How to choose your Toe Jammer Footplate?
 
Please provide a picture of your existing footrest via our CONTACT EMAIL if possible.

1. Now when choosing your Footplate Two things you need to know. (Most Important)
  • The width of your feet together with shoes on (in inches)

  • The inside width of the front forks of your wheelchair (in inches)

2. What type of wheelchair are you putting your footplate on?
(any can be notched to fit your chair)
  • A manual ridged frame chair (inches)

    • Small 8x8

    • Medium 10x10

    • Large 12w x 10L

  • A powered wheelchair

    • Medium 10 x10

    • Large 12w x 10L

  • A hospital style or individual footrests

    • 6x10 inches each foot, 2 plates.

3. How do you plan on attaching the footplate to the wheelchair?
Check out our video to see how easy it is.
  • You can mount directly to the existing footrest using the bolt holes in the Toe Jammer footplate, position the new TJ footplate on the existing plate slide it till optimal positioning and line up the bolt holes with one of the groves of the existing plate and drop the bolts that are provided through and tighten everything up using the hardware provided.

  • If you choose to use the bracket that your existing footrest was attached to make sure that the bolt holes are 3 inches center to center or specify when you are ordering so that the bolt holes will line up with your chair. 
    Standard bolt holes are 3 Inches center to center

  • Next is to determine how fare back you want the footplate to be, standard bolt holes are in the center and either a set 1 5/8” forward or behind center you choose when ordering.

4. Need a Notched Plate?
  1.  If you have a chair with narrow front forks and need one of our specialty plates that are notched out to allow for the bend of the footrest bar. We will need to know almost everything about the rest or if you could send a picture would be the best.

    • On the notched out plates the side guard only comes back 3 inches instead of halfway and the notches are right after the end of the side guard.

      • If you are mounting to your existing plate then the bolt holes are not that important but if you’re mounting to the bracket then I will need to know the offset of the bolt holes and the width of the holes center to center.

    • I will need to know how far back you want the first set of holes to be. When ordering if you could as much information as possible in the comment box it would help us to get your order correct the first time. Also, any pictures or dimensions you can provide will be greatly appreciated.

5. No existing footplate? Just a Bar? 

If you have just a bar please specify, we do have brackets that will attach to the bar, but it will limit you on positioning of the plate. If you would like extra mounting holes please specify when ordering.

6. Choosing to drill out?

 A standard plate comes with No holes except the six mounting holes. If you would like to have a full drill out on your plate, make sure you check that box when ordering.

7. Choosing your color. 

Our plates are powder coated so that they are durable, and they color lasts through just about anything possible. The standard colors are white and black and plain (no color) but for a small up charge we can make it almost any color you want. We can match the accents on your chair. We would just need a sample of the color you want to match.

TOE JAMMER
FOOTPLATES
EXPERIENCE
FOLLOW US

© 2023 by ToeJammer Foot Plates, Made in Punta Gorda, Florida. Proudly Designed by Leslie

0